Problem:
Some cable companies activate the guide when using 0-9 or Favs on Flipper.
Flipper can eliminate or minimize the time the guide appears by adjusting the Channel Entry Format when setting Favs.
Solution:
1 Try a Different Channel Entry Format
- The Guide may be triggered by the LC (OK) signal
- Fix: Program Favs without LC (OK)
Example Format:
✔ 123, ADD; 456, ADD;
2 Delete Incorrectly Entered Favs or Reset
Reset Flipper to Factory Settings
📌 Press and hold ADD until
the light turns solid, then
enter 954
✔ The light will blink out,
confirming reset
Delete Incorrectly Entered Favs
📌 Follow the same process as programming, but use DELETE
Steps:
1 Press and hold STB + DEL
until the light turns solid
2 Enter the channels to delete
3 Exit by pressing STB