Managing Smart Screen Issues with Sky Q and Flipper

Sky Q typically uses code 3734. However, some Sky Q boxes may automatically power on a smart screen. Here are possible solutions:

1) Keep Sky Q On Permanently (Recommended)

In Flipper, modify settings:

Press and hold ADD
until the light is solid.

Enter 999
.

This ensures the On/Off button only controls the TV, while Sky Q stays on.

Important: Disable or extend standby mode in the Sky Q settings.

2) Adjust Sky Q Settings

Look for an option to disable this behavior in the Sky Q menu.

Many users have reported this issue—consider calling Sky Q support for assistance.

3) Disconnect WiFi

Based on reports, the smart screen issue only occurs when Sky Q is connected to WiFi.

Try disconnecting the WiFi and see if the issue resolves.

4) Use Flipper’s Learning Mode

Copy the Exit signal from Sky Q into Flipper’s Mute button.

This can serve as a quick workaround to dismiss the smart screen.